The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded neodymium low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.
The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.
A balanced male XLR output provides a line level mix-out signal to additional powered MILAN enclosures. Mains power is supplied via an IEC main connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.
Specifications
Net Weight: 11.89kg (26.2lbs)
Dimensions: 521.5mm x 329.5mm x 293mm (20.5" x 13" x 11.6")
Components: 1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response: 55Hz - 22kHz ±3dB
Dispersion: 90°H x 60°V @ -6dB points
Maximum SPL: 119dB continuous, 125dB peak
Construction: Injection-moulded polypropylene enclosure. Self-coloured in black-blue. Recessed carrying handle. Integral dual angle pole mount socket
Grille: Powder coated perforated galvanised steel mesh
Connectors: Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
Flying Hardware: (6) M10 internal threaded rigging points
NEW FOR 2011/12
The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded neodymium low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.
The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.
A balanced male XLR output provides a line level mix-out signal to additional powered MILAN enclosures. Mains power is supplied via an IEC main connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.
Specifications
- Net Weight: 11.89kg (26.2lbs)
- Dimensions: 521.5mm x 329.5mm x 293mm (20.5" x 13" x 11.6")
- Components: 1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver
- Frequency Response: 55Hz - 22kHz ±3dB
- Dispersion: 90°H x 60°V @ -6dB points
- Maximum SPL: 119dB continuous, 125dB peak
- Construction: Injection-moulded polypropylene enclosure. Self-coloured in black-blue. Recessed carrying handle. Integral dual angle pole mount socket
- Grille: Powder coated perforated galvanised steel mesh
- Connectors: Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
- Flying Hardware: (6) M10 internal threaded rigging points