Presenting the Crown XLi 800, powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Presenting the Crown XLi 1500, with over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series.

The GX3 Stereo Power Amplifier from QSC is ideal for professional entertainers who require maximum performance and portability on a limited budget.

This Superb 19" rackmount 2U power amplifier with dual fan cooling and class H architecture has a awesome 2000w power output and extremely low price but retains a great build quality.

YAMAHA P2500S POWER AMPLIFIER

This Superb 19" rackmount 2U power amplifier with dual fan cooling and class H architecture has a awesome 2800w power output and extremely low price but retains a great build quality.

RM306 6-zone Mixer Amplifier + USB/SD/FM/Bluetooth Zone amplifier with 6 x 30W output to 100V or 4/8 Ohms speakers, which can be monitored via a headphone output. 3 mic/line inputs, 1 aux input and an integral USB/SD/FM player and Bluetooth receiver

A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers

The P44800 from Citronic is a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.

Like its predecessor, the new Crown XLS1502 is ultra-efficient with Crown’s patented DriveCore technology and can drive 1550W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers.

The new S-Series amplifiers are the latest dual channel sound reinforcement amplifier line offering from Wharfedale Pro. The range consists of three models: S-1000, S-1500 and S-2500 models.

The new S-Series amplifiers are the latest dual channel sound reinforcement amplifier line offering from Wharfedale Pro. The range consists of three models: S-1000, S-1500 and S-2500 models.

2 x 775w at 2ohms 2 x 525W at 4 Ohms or 2 x 300W 8 Ohms. Weighs less than 4kgs ! Serious performance! Five decades of power amp innovation have been rolled into Crown's impressive new XLS Series of amplifiers features multiple inputs, so you can plug in anything anything and play anywhere.

The QSC GX5 Stereo Power Amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget.

The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched performance at a breakthrough price.

This Superb 19" rackmount 2U power amplifier with dual fan cooling and class H architecture has a awesome 3600w power output and extremely low price but retains a great build quality.

Citronic's 2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems

A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers

Presenting the Crown XLi 2500, with over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series.

The Q44 is based on EV's reference standard P Series. It guarantees the same high quality construction and output.

Like its predecessor, the new Crown XLS1002 is ultra-efficient with Crown’s patented DriveCore technology and can drive 1100W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers.

YAMAHA P3500S POWER AMPLIFIER

PROEL HPA450 2 X 225W RMS AT 4OHMS

The new S-Series amplifiers are the latest dual channel sound reinforcement amplifier line offering from Wharfedale Pro. The range consists of three models: S-1000, S-1500 and S-2500 models.

2 X 1050W at 2 ohms, 2 x 650W at 4 Ohms, 2 x 375W at 8 Ohms, Weighs under 5kgs ! Serious performance! Five decades of power amp innovation have been rolled into Crown's impressive new XLS Series and features multiple inputs, so you can plug in anything anything and play anywhere.

Dynacord's new SL Series Amps offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems.

The Crown XTi1002 is a 1400watt power amplifier with DSP that sets new standards for portable sound amplification. Offering increased control, an enhanced feature set and a sleeker design

YAMAHA P5000S POWER AMPLIFIER

The GXD4 and QXD8 amplifiers are unlike other amps in this category that provide little more than a front panel screen to control the same functions that have been under rear-panel, DIP switch control for decades.

With the combination of efficient CLASS H power stages and a reliable switching power supply, the Proel HPX2400, can deliver 2400 watts total at 2 ohm load making it a very convenient source of power.

Q66 - the versatile workhorse of the new Q series amplifiers‚ delivers 2 x 600W @4Ohms / 2 x 900W @2Ohms

The DAP Xtreme Power amplifiers have been developed with several different protection systems to serve as true workhorses for a wide range of applications and have been manufactured in a 3U rack space.

The QSC RMX 1450 Power Amplifier gives you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on.

Like its predecessor, the new Crown XLS2002 is ultra-efficient with Crown’s patented DriveCore technology and can drive 2100W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers.

The next generation of Contractor Precision Series two channel amplifiers provide flexibility and reliability for the professional installation business.

High output stereo amplifiers with digital switch-mode design. Very lightweight construction in a sturdy 2U precision engineered housing. Fast and high power delivery, even at low frequencies, ultra-efficient Class H circuit design

With the combination of efficient CLASS H power stages and a reliable switching power supply, the HPX2800, can deliver 2800 watts total at 2 ohm load making it a very convenient source of power.

PROEL HPA750 POWER AMPLIFIER 2 X 375W RMS AT 4OMHS

The QSC PLX-1104 Professional Power Amplifier brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation

Dynacord's new SL Series Amps offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems.

The next generation of Contractor Precision Series two channel amplifiers provide flexibility and reliability for the professional installation business.

2 x 1550W at 2 ohms, 2 x 775W at 4 Ohms, 2 x 440W at 8 Ohms, Weighs Less Than 5kg ! Serious performance! Five decades of power amp innovation have been rolled into Crown's impressive new XLS Series of amplifiers.

High output stereo amplifiers with digital switch-mode design. Very lightweight construction in a sturdy 2U precision engineered housing. Fast and high power delivery, even at low frequencies, ultra-efficient Class H circuit design

The QSC GX7 2000 watt power amplifier gives your speakers the power they need while giving you the efficiency and protective features you want for easy operation and peace of mind.

Like its predecessor, the new Crown XLS 2502 is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers.

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses

The Crown XTi2002 is a 2000watt power amplifier with DSP that sets new standards for portable sound amplification. Offering increased control, an enhanced feature set and a sleeker design.

Dynacord's new SL Series Amps offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems.

PUSHING OUT A WHOPING 3000W RMS THIS NEW Q99 REALLY IS UNBEATABLE AT THIS PRICE RANGE

The next generation of Contractor Precision Series two channel amplifiers provide flexibility and reliability for the professional installation business.

The QSC RMX 2450 gives you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on.

CPX Series Power Amplifiers Three rugged, ultra affordable power designs in the great Crest Audio tradition.

Presenting the Crown XLi 3500, with over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series.

The GXD4 and QXD8 amplifiers are unlike other amps in this category that provide little more than a front panel screen to control the same functions that have been under rear-panel, DIP switch control for decades.

The CPS2.4 is ideal for smaller full range systems or larger, mid to high frequency amplification, installations. The CPS2.4 is an ideal companion for EV s popular EVID line of premium surface mount and ceiling speaker systems.

The CP1200 supplies up to 2x600 watts into two ohms, and 2x400 watts into four ohms.

With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the Q1212 offers the horsepower to challenge the legendary P3000

The next generation of Contractor Precision Series two channel amplifiers provide flexibility and reliability for the professional installation business.

Dynacord's new SL Series Amps offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems.

The QSC PLX1802 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required.

The CP1800 supplies up to 2x900 watts into two ohms, and 2x600 watts into four ohms.

The PLX2502 features built in subwoofer processing, filter switches, and front panel indications of bridge mono status.The PLX-2502 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading)

The Crown XTi4002 is a 3200watt power amplifier with DSP that sets new standards for portable sound amplification. Offering increased control, an enhanced feature set and a sleeker design.

The HPX4600, can deliver 4600 watts total at 2 ohm load making it a very convenient source of power in even the most demanding sound reinforcement applications.

The audio performance of the CP2200 is state of the art, and fulfills the highest sound expectations of demanding applications from concert to theater sound

The PLX2 series is a range of premium quality, high power amplifiers designed for the most demanding live performance uses, The PLX 3102 features built-in subwoofer processing 2 ohm capabilty.

The HPX6000 can deliver 6000 watts total at 2 ohm load making it a very convenient source of power in even the most demanding sound reinforcement applications.

The QSC PL325 is the smallest amplifier in the PowerLight 3 series, designed for the most demanding live audio users, whether in touring rigs or fixed installations, rugged in design delivering up to 1250W into loads as low as 2oms

QSC's RMX 4050HD power amplifier represents the state of the art in professional quality performance at an affordable price.

The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono power is required.

The QSC PL340 is the intermediate amplifier in the PowerLight 3 series, designed for the most demanding live audio users, whether in touring rigs or fixed installations. It is very rugged in design delivering up to 2000W into loads as low as 2ohms.

Electro Voice s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format.

The CPS 2.11 can power large stadium, theater, and auditorium installations with ease.

The CPS4.5 is an four channel amplifier Class D technology for maximum amp efficiency and minimized heat dissipation in 19 inch racks.

QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers

This lightweight, switchmode amplifier delivers 750W per channel into 4 ohms, built in a 2U chassis, has all the sonic qualities and reliability of the MC and T Series amplifiers

The Crown XTi6002 is a 6000watt power amplifier with DSP that sets new standards for portable sound amplification. Offering increased control, an enhanced feature set and a sleeker design.

The Lab Gruppen FP2200 is a lightweight and space-saving power amplifier, ideal for use in high quality touring sound systems as well as in demanding permanent installations.

The flagship of EV's Precision Series Compact amplifiers is the CP4000S. With up to 2x2100 watts into two ohms, and 2x1500 watts into four ohms, and only 8.7 kg !

the E25 delivers 1250W per channel into 4 ohms with all the sonic qualities and reliability of the MC and T Series amplifiers, without the physical weight, making it an ideal choice for touring.

The FP2600 is a lightweight and space-saving power amplifier, ideal for use in high quality touring sound systems as well as in demanding permanent installations.

The Lab Gruppen FP2400Q is suited to a diversity of applications, including multi-channel monitor systems, four-channel reproduction, and compact amplification in active 2 -3 and 4-way systems such as line arrays.

The CPS4.5 is an four channel amplifier from Electro Voice featuring groundbreaking Class D technology for maximum amp efficiency

The CPS8.5 is an eight channel amplifier from Electro Voice featuring groundbreaking Class D technology

The QSC PL380 is the largest amplifier in the PowerLight 3 series, designed for the most demanding live audio users, whether in touring rigs or fixed installations. It is very rugged in design delivering up to 2 x 2500W into 4ohms.

Aimed at the touring market in particular, the E45 delivers a mammoth 2250W per channel into 4 ohms and only weighs 11kg !

The FP3400 offers a super-efficient switch mode power supply which reduces the weight without any effect on the audio signal, resulting in brilliant sound quality from the extreme lows to the very highs even under very difficult conditions.

The FP 4000 has ample reserves for a wide variety of applications, including effortless driving of mid- and high-frequency bands in line array systems as well as the top or bottom end of monitor wedges.

A couple of K3 are capable to grant an overall better flexibility, reliability and performance compared to what is offered by any other 2U 4 channel amplifier at the same rack space requirement and price!

The TG Series also offers the power and transient response to drive subwoofers along with the low distortion for critical HF signals

The versatile FP 7000 supplies power output (2 × 3500 W at 2 ohms) well matched to a wide variety of applications. At the core of the FP 7000’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD output stage.

The E90 is the newest addition to the E Series and is the most powerful amplifier on the market delivering a mammoth 4500w per channel at 4 ohms !

This FP6400 is extreme in every aspect with Lab Gruppen's leading technology, it offers a super-efficient switch mode power supply which reduces the weight without any effect on the audio signal, resulting in brilliant sound quality from the extreme lows to the very highs.

The TG Tour Grade amplifiers use a grounded bridge 3-step class-H topology to ensure the highest acoustic performance and reliability.

the FP 9000 provides versatility and value across a wide range of applications for full-range cabinets, band-limited line array systems, and stage monitoring and has been updated to provide more sustained high power during extended bursts of low frequency content.

The FP 6000Q is the sister amplifier to the flagship FP 10000Q four-channel model in the FP+ Series. At the core of the FP 6000Q’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD output stage

The new flagship of Lab.gruppen’s touring amplifier line, the FP 14000 produces a staggering total output power of 14000 W – an unprecedented achievement in a 2U frame weighing only 12 kg.

The FP 10000Q is the flagship four-channel model, at the core of the FP 10000Q’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD output stage, exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs

The PLM14000 offers 7000 W per channel @ 2 ohms, 4300 W per channel @ 4 ohms, 2300W per channel @ 8 ohms. Four full-featured Lake Processing modules, each offer precise settings for gain, delay, crossover slope, equalization, and limiting at only 13.5KG !

The PLM10000Q offers 2350 W per channel @ 2 ohms, 2300 W per channel @ 4 ohms, 1300W per channel @ 8 ohms. Four full-featured Lake Processing modules, each offer precise settings for gain, delay, crossover slope, equalization, and limiting at only 13.5KG !