KLA12 Fixed Powered Line Array Speaker
The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.
This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.
Product Features
500 W + 500 W power module
Rugged, ABS enclosure delivers light-weight durability
SOLO™ Rigging System supports deployment without tools or external hardware
Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 × KLA12 and 2 × KLA181
90° × 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
Extensive DSP further enhances and protects performance
1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
powerCON® Input and Thru connections
Tilt-Direct™ pole mount assists directivity in single-unit applications
Product Specifications
Basic Technical
Configuration Multipurpose 2-way
Transducers: High Frequency: 1.75” diaphragm compression driver | Low Frequency: 12” cone transducer
Frequency Response (-6 dB): 49 Hz - 18 kHz
Frequency Range (-10 dB): 44 Hz - 20 kHz
Nominal Coverage: 90° H x 18° V
Maximum SPL (1 meter): 131 dB peak
Amplifiers
Power Output: HF: 500 W Class D continuous | LF: 500 W Class D continuous
Input Impedance: XLR: 40 kΩ balanced / 20 kΩ unbalanced
Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP™), Array Size (1-5), Front LED (Pwr/Limit/Off)
Indicators: Power, Signal, Standby, Limit
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 Power): 100 VAC, 2.3 A | 120 VAC, 2.01 A | 230 VAC, 1.13 A
Connectors
Balanced female XLR line level input
Balanced male XLR full range line level out
Remote attenuation control
Locking powerCON power connector AC In
Locking powerCON® power connector AC Out
Physical & Dimensions
Material: Impact resistant ABS
Finish: Black or white paint
Grille: Rugged powder coated steel grille
Dimensions (HWD) inches: 15.0 × 23.4 × 16.6
Dimensions (HWD) mm: 382 x 594 x 422
Net Weight: 55 lb tHE / 25 kg
The QSC KLA 8000W Powered Line Array PA System
The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.
This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.
Whats Included in the awesome package from Audio Works ?
4 X QSC KLA12 ACTIVE TOP CABS
4 X QSC KLA181 ACTIVE SUBWOOFERS
2 X CONNECT POLES
SPECS KLA12
- Product Features
- 500 W + 500 W power module
- Rugged, ABS enclosure delivers light-weight durability
- SOLO™ Rigging System supports deployment without tools or external hardware
- Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 × KLA12 and 2 × KLA181
- 90° × 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
- High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
- powerCON® Input and Thru connections
- Tilt-Direct™ pole mount assists directivity in single-unit applications
- Product Specifications
- Basic Technical
- Configuration Multipurpose 2-way
- Transducers: High Frequency: 1.75” diaphragm compression driver | Low Frequency: 12” cone transducer
- Frequency Response (-6 dB): 49 Hz - 18 kHz
- Frequency Range (-10 dB): 44 Hz - 20 kHz
- Nominal Coverage: 90° H x 18° V
- Maximum SPL (1 meter): 131 dB peak
- Amplifiers
- Power Output: HF: 500 W Class D continuous | LF: 500 W Class D continuous
- Input Impedance: XLR: 40 kΩ balanced / 20 kΩ unbalanced
- Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP™), Array Size (1-5), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
- AC Power Consumption (1/8 Power): 100 VAC, 2.3 A | 120 VAC, 2.01 A | 230 VAC, 1.13 A
- Connectors
- Balanced female XLR line level input
- Balanced male XLR full range line level out
- Remote attenuation control
- Locking powerCON power connector AC In
- Locking powerCON® power connector AC Out
- Physical & Dimensions
- Material: Impact resistant ABS
- Finish: Black or white paint
- Grille: Rugged powder coated steel grille
- Dimensions (HWD) inches: 15.0 × 23.4 × 16.6
- Dimensions (HWD) mm: 382 x 594 x 422
- Net Weight: 55 lb / 25 kg
SPECS KLA181
- Product Features
- 1,000 watt power module
- 18" vented subwoofer
- High acoustic output (135 dB SPL peak)
- Frequency range down to 33 Hz (-10 dB)
- Extensive DSP further enhances and protects performance
- powerCON® Input and Thru connections
- Threaded pole receptacle for free-standing applications (black models only)
- Suspension made possible via M10 fittings or KLA12AF Array Frame
- Integrated threaded pole mount supports up to two KLA12 enclosures (black models only)
- Product Specifications
- Basic Technical
- Configuration 18" subwoofer
- Transducers: Low Frequency: 18" cone transducer
- Frequency Response (-6 dB): 38 Hz
- Frequency Range (-10 dB): 33 Hz
- Maximum SPL (1 meter): 135 dB peak
- Amplifiers
- Power Output: 1000 W Class D continuous
- Input Impedance: XLR: 40 kΩ balanced / 20 kΩ unbalanced
- Controls: Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
- AC Power Consumption (1/8 Power): 100 VAC, 2.3 A | 120 VAC, 2.01 A | 230 VAC, 1.13 A
- Connectors
- Balanced female XLR line level input
- Balanced male XLR full range line level out
- Remote attenuation control
- Locking powerCON power connector AC In
- Locking powerCON® power connector AC Out
- Physical & Dimensions
- Material: Painted birch plywood
- Finish: Black or white textured paint
- Grille: Black or white powder coated 16 gauge steel
- Dimensions (HWD) inches: 21.6 × 23.1 × 25.7
- Dimensions (HWD) mm: 547 x 586 x 633
- Net Weight: 100 lb / 45.3 kg
