- Product QSC PLX2 PLX3102 3100W PROFESSIONAL POWER AMPLIFIER successfully added to compare list

QSC PLX2 PLX3102 3100W PROFESSIONAL POWER AMPLIFIER

Email to a Friend

Be the first to review this product

Availability: In stock

RRP: £1,459.40 Our Price: £964.80

Quantity

QSC PLX2 PLX3102 3100W PROFESSIONAL POWER AMPLIFIER

Double click to enlarge

Additional Images

Product Description:

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.

The PLX3102 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3102 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.

SPECIFICATIONS	PLX3102
	STEREO MODE, both channels driven *
8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD	550 W 600 W
4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD	900 W 1000 W
2 ohms EIA 1 kHz 1% THD	1550 W
	BRIDGE MONO MODE *
8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD	1900 W 2100 W
4 ohms 1 kHz 1% THD	3100 W

Signal to Noise (20 Hz - 20 kHz)	-107 dB
Input Sensitivity @ 8 ohms	1.23 Vrms
Gain @ 8 ohms	35 dB
Output Circuitry	2-Tier Class H
Distortion (SMPTE-IM)	Less than 0.02%
Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz	Less than 0.02% Less than 0.02%
Frequency Response	20 Hz-20 kHz, -0.5 dB
Damping Factor	Greater than 500
Input Impedance	20k ohms balanced 10k ohms unbalanced
Input Clipping	11 Vrms (+21 dBu)
Cooling	Variable-speed fan, rear-to-front air flow
Input Connectors, each channel	3-pin XLR and 1/4" TRS balanced
Output Connectors, each channel	Neutrik® NL4 Speakon® and Touch-proof binding posts (Both channels available on Ch 1 NL4 connector)
Rear Panel Switches	Input Configuration: Bridge/Stereo/Parallel Clip Limiters each channel Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)
Front Panel Controls	Detented Gain Attenuator: 0 to ∞ dB Power On/Off
Front Panel Indicators	Clip: Red LED -10: Green LED Signal (-35 dB): Green LED Power: Blue LED Parallel: Amber LED Bridge Mono: Amber LED
PROTECTION
Amplifier Protection	Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection Stable into reactive or mismatched loads
Load Protection	On/off muting, DC-fault power supply shutdown
Infrasonic	-3 dB, 5 Hz
DC fault	Power supply shutdown
Ultrasonic	-3 dB, 85 kHz
Short Circuit	Cutback
Thermal	Muting at 90° C
Over Current	Active clip limiting Power spply cutback
High Line	Standard +15%, survive +25%
Low Line	-33%
PHYSICAL
Dimensions Height Width Depth, Rack mounting surface to rear panel Overall Depth	3.5" (8.9 cm) 2 rack spaces 19" (48.3 cm) 12.8" (32.6 cm) 14.875" (37.9 cm)
Weight	21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shipping
Agency Approvals	CE, FCC, cUL, UL