DSR112
12" 2-way Active Loudspeaker System
The DSR112 is the most compact and versatile multi-purpose 2-way active loudspeaker system in the series. Capable of an astonishing maximum peak SPL of 134dB, the DSR112 is a perfect match to a wide range of portable PA and installation applications. Ideal for use as a front of house main PA, as well as for stage monitoring applications, it also includes integrated M10 rigging points for suspended applications.
Features
Ultra-precise 48-bit digital sound processing
Digital FIR-X tuning™ (linear phase FIR filter)
High performance 48-bit DSP (76-bit accumulator)
24-bit discrete AD and DA converters
D-CONTOUR (Dynamic-CONTOUR) multi-band dynamic processing
All-new 1300W Class-D amplifiers with PFC* switching mode power supply
*Power Factor Correction
LF: 850W
HF: 450W
Maximum SPL 134dB peak
Extensive protection of the transducers, amplifiers and power supply from highperformance DSP
Premium-grade, custom designed transducers
LF:High power 12" neodymium woofer with 3" voice coil
HF:2" precision titanium diaphragm, neodymium, compression driver
Exclusive 90° × 60° CD Waveguide Horn
Compact and lightweight (21.2kg / 47lbs)
Performs as main PA or floor monitor
Stand and pole mountable, with 35mm pole sockets
Specifications
System Type 12" 2-way, Bi-amp Powered Speaker, Bass-reflex Type
Frequency Range (-10dB) 55Hz ~ 20kHz
Frequency Response
(-3dB) 60Hz ~ 18kHz
Coverage Angle H90°×V60°
Crossover Type FIR-X tuning (linear phase FIR filter)
Crossover Frequency 1.7kHz
Measured Maximum SPL (peak) IEC noise @ 1m 134dB SPL
Amplifier
Amplifier Type Class-D
Power Rating*¹ 1300W
Low-Frequency 850W
High-Frequency 450W
Cooling Natural Convection
Controls LEVEL control, LINE/MIC switch, HPF switch, D-CONTOUR switch, FRONT LED DISABLE switch, POWER switch
Indicators PEAK: x1 (Red), LIMIT:x1 (Red), PROTECTION:x1 (Red), POWER:x1 (Green), FRONT:x1 (White),
HPF:x1 (Orange), D-CONTOUR :x1 (Orange)
HPF Frequency 120Hz (-6dB) 24dB/oct
Boost Type D-CONTOUR (Dynamic CONTOUR)
Protection Load POWER switch on/off: Mute
DC-fault: power supply shuts down automatically (reset manually)
Integral Power Protection: Limit the output (return automatically)
Clip limiting
Amplifier Thermal: Limit the output or Mute (return automatically)
Output through current: Amplifier shuts down automatically (reset manually)
Power supply Thermal : Amplifier shuts down automatically (reset manually)
Over voltage: power supply shuts down automatically (reset manually)
Connectors Input XLR-3-31 x1 (Balanced)
TRS Phone Jack x1 (Balanced)
Output XLR-3-32 x1 (Balanced)
Parallel connection with INPUT
Power AC inlet x1
Power Consumption 1/8Power 100W
Transducer
Low-Frequency 12" cone
Magnet Materials Neodymium Magnet
Voice Coil Diameter 3"
High-Frequency 2" Titanium diaphragm compression driver
Magnet Materials Neodymium Magnet
Enclosure
Dimension (W x H x D) 370×638×368mm
(14 5/8"x25 2/8"x14 4/8")
Weight 21.2kg (47lbs)
Externals Finish, Color LINE-X®, Black
Grille 16 gauge matte black powder coated perforated steel grille
Metal Handle 1pc (Top Board)
Pole Socket Diameter 35mm (Bottom Board)
Flying Hardware 3 x M10 (TOP L/R 1pc each, Bottom rear 1pc)
INPUT CHARACTERISTICS
MIC/LINE switch: LINE
Input Sensitivity LEVEL position: maximum 0dBu
LEVEL position: center(12 O'clock) +7dBu
Maximum Input Level +24dBu
Input Impedance 12kΩ
MIC/LINE switch:MIC
Input Sensitivity LEVEL position: maximum -25dBu
Maximum Input Level -11dBu
Input Impedance 8kΩ
THE YAMAHA DSR118W - NEW FOR 2011
18" Active Subwoofer System
The DSR118W is a compact and high power active subwoofer system that extends the bass of the DSR full range speaker system to below 40Hz. With a high efficiency, low distortion 800W Class-D amplifier and a long travel, cast frame 18" woofer, the DSR118W achieves maximum peak SPL of 132dB. It also features a 35mm pole socket on the top, making it easy to set up a high performance sub/mid-high system.
Features
- All-new 800W Class-D amplifier with PFC* switching mode power supply
- *Power Factor Correction
- Maximum SPL 132dB peak
- Extensive protection of the transducers, amplifiers and power supply
- Premium-grade, custom designed transducers
- Long travel, cast frame 18" woofer
- High power, low distortion output
- Low-frequency extension down to 40Hz
- Compact and lightweight (42kg/ 93lbs)
- Bass-reflex, direct-radiating design
- Top panel pole mount for satelite configuration
- Heavy-duty 16-gauge (1.6mm) steel grilles
Specifications
- System Type 18" Powered Speaker Bass-reflex Type
- Frequency Range (-10dB) 40Hz ~ 130Hz
- Frequency Response
- (-3dB) 50Hz ~ 110Hz
- Measured Maximum SPL (peak) IEC noise @ 1m 132dB SPL
- Amplifier
- Amplifier Type Class-D
- Power Rating*¹ 800W
- Cooling Natural Convection
- Controls LEVEL control, POLARITY switch, FRONT LED DISABLE switch, POWER switch
- Indicators PEAK: x1 (Red), LIMIT:x1 (Red), PROTECTION:x1 (Red), POWER:x1 (Green), FRONT:x1 (White)
- Protection Load POWER switch on/off: Mute
- DC-fault: power supply shuts down automatically (reset manually)
- Integral Power Protection: Limit the output (return automatically)
- Clip limiting
- Amplifier Thermal: Mute (return automatically)
- Output through current: Amplifier shuts down automatically (reset manually)
- Power supply Thermal : Amplifier shuts down automatically (reset manually)
- Over voltage: power supply shuts down automatically (reset manually)
- Connectors Input XLR-3-31 x2 (Balanced)
- Output XLR-3-32 x2 (Balanced)
- Parallel connection with INPUT
- Power AC inlet x1
- Power Consumption 1/8Power 100W
- Transducer
- Low-Frequency 18" cone
- Magnet Materials Ferrite Magnet
- Voice Coil Diameter 3"
- Enclosure
- Dimension (W x H x D) 520×638×584 mm
- (20 4/8"x25 2/8"x23")
- Weight 42.0kg (93lbs)
- Externals Finish, Color LINE-X®, Black
- Grille 16 gauge matte black powder coated perforated steel grille
- Metal Handle 2pcs (Side Board)
- Pole Socket Diameter 35mm (Bottom Board)
- INPUT CHARACTERISTICS
- MIC/LINE switch: LINE
- Input Sensitivity LEVEL Position: maximum 0dBu
- Maximum Input Level +24dBu
- Input Impedance 10kΩ
.jpg)
