The FBT Verve 8MA is a touring quality monitor, loaded with B&C Drivers, birch ply construction, 8inch + 1inch coaxial, 65Hz - 20KHz ( at -6dB ), 150W LF + 50W HF bi-amped, peak output 117dB
2-way, bass-reflex, bi-amplified speaker system.
1 x 8” (2” VC) B&C® woofer.
1 x 1”exit (1.4” VC) B&C® coaxial mount compression driver.
100°H x 100°V constant directivity horn.
150W RMS Class G woofer amplifier.
50W RMS Class AB hf amplifier.
Advanced protection circuits with dynamic equalization of the low frequencies and limiter.
High S/N ratio, 24dB/oct active filters for the preamp section.
Control panel with: ground-Lift, XLR input and output, limiter and protection LEDs, volume control.
11-layer birch plywood scratch resistant enclosure (15mm / 0.59”). 45°monitor taper.
4 x M6 omni-mount rigging points.
Specifically designed frequency response for nearfield use as monitor.
Exceptional coherent sound diffusion over the entire dispersion angle without lobbing normally associated with conventional two-way enclosures.
Weight 11.2 KG
.jpg)
