The FBT Verve 12MA is a touring quality monitor, loaded with B&C Drivers, birch ply construction, 12inch + 1inch coaxial, 60Hz - 20KHz (at -6dB), 300W LF + 100W HF bi-amped, peak output 123dB
2-way, bass-reflex, co-axial bi-amplified speaker system.
1 x 12” (2” VC) B&C® woofer.
1 x 1”exit (1.4” VC) B&C® compression driver.
90°H x 90°V horn for 15Ma and 12Ma
300W RMS Class G woofer amplifier.
100W rms Class G hf amplifier.
11-layer birch plywood scratch resistant enclosure (15mm / 0.59”). 45°monitor taper.
Advanced protection circuits with dynamic equalization of the low frequencies and limiter.
High S/N ratio, 24dB/oct active filters for the preamp section.
Control panel with: ground-Lift, XLR input and output, 2-band equalization (High/Low), limiter and protection leds, volume control.
3 x M10 rigging points, 35mm Ø (1.38”) top-hat for speaker stand and wall bracket mount flange, metal carrying handles.
Exceptional dispersion coherence in the whole coverage angle, high SPL and accurate sound reproduction make these VERVE speakers ideal for permanent installations, live sound events, and stage monitoring applications.
Reduced total weight due to incorporation of neodymium components, the latest built-in power amplifier technology, switch mode power supplies and a light polypropylene horn.
Weight 19 KG
.jpg)
