NEW ALTO ZEPHYR ZMX124FX USB 24CH MIXER WITH EFFECTS
Full-featured Professional Live Mixing Experience
The ZEPHYR ZMX244FXU is our flagship ZEPHYR ZMX and is a 24-channel, 4-bus mixer with loads of inputs, outputs, routing, EQ, and effects, for any live performance reinforcement need. It features 18 ultra-low microphone inputs with balanced TRS jacks and insert points, a three-band EQ with a sweepable mid frequency on 16 channels, four channels of stereo inputs with 4-band fixed EQs, and a 4-bus assignable sub mixer. You also get 60mm high-precision faders and four AUX sends per channel (2 Pre/Post switchable pots). The ZMX244FXU gives you the all the features you need to mix any professional live performance.
256 Onboard Alesis Effects
Whether you're mixing the church choir or a heavy metal band, give your mix a professional edge with 256 onboard 24-bit Alesis DSP effects. Choose from room and space delays, small and large hall acoustics, plate and spring reverbs, flangers, chorusus and more. The ZMX244FXU offers 16 variations of 16 professional effects from which to build, tweak, and dial in your sound.
USB Audio Interface
Capture your live mix with your laptop and computer recording software by simply connecting a USB cable to the ZMX244FXU. This USB-enabled professional mixing console features a USB port that streams two channels of 24-bit audio out to your computer (Main Mix or Sub Mix 1/2). With the ZMX244FXU you can record band rehearsals, club gigs, speaking engagments, worship meetings, and any other live performance reinforcment sitation. What's more, this USB connection is bi-directional so you can also stream audio from your laptop to the ZMX244FXU for audio and music playback!
High headroom, low noise
The ZMX244FX is the ultimate ZEPHYR ZMX mixer with the most features and inputs in the series. Of course, the purity of your mix is essential so we held nothing back. The ZMX244FX is designed with high headroom and ultra low-noise, discrete mic preamps so you always get the full dynamic range of your mix every time. This professional mixer sets the standard of quality as our top-of-the-line model.
Visualize your mix
We designed every ZEPHYR ZMX mixer with your performance in mind. Sometimes venues are dark and it can be hard to see what you're working with. Alto Professional solves this problem by not only color coding each section of the mixer, but also by using brightly colored knobs so that you can easily find what you need to adjust before you ever lay a finger on the mixer. Our blue, red, yellow and white pots are instantly easy to identify in dim lighting. LED indicators for output level, peak, and phantom power also assist in making sure that you have multiple visual cues that compliment everything you're hearing.
FEATURES
24-CHANNEL MIXER WITH EFFECTS AND USB INTERFACE
44 total inputs
3-band EQ with swept mid on microphone channels
4-band fixed EQ on stereo line channels
Stereo 9-band graphic EQ
4 AUX sends per channel: 2 PRE/POST faders switchable
4-bus sub mixer
60mm high precision faders
24-bit Alesis DSP effects for 256 choices (16 presets × 16 variations)
USB audio interface for computer software recording and monitoring
SPECIFICATIONS
Input Channels
Microphone Input: Electronically Balanced
Frequency Response: 20 Hz to 20 kHz, ±1 dB
Distortion: ( THD&N) ＜0.03% at 0 dBu, 1kHz
Gain range: 0 dB to 50 dB (Mic)
SNR (Signal-to-noise ratio): 114 dB
Line Input: Electronically Balanced (Unbalanced)
Frequency Response: 20 Hz to 20 kHz, ±1 dB
Distortion: (THD&N) ＜0.03% at 0 dBu, 1 kHz
Gain range: -15 dBu to 35 dBu
Impedance Microphone Input: 1.4 kOhms
Channel Insert return: 2.5 kOhms
All Other Input: 10 kOhms or Greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms
Equalization
Hi Shelving: ±15 dB @ 12 kHz
Mid bell: ±12 dB @ 100 Hz - 8 kHz
Low shelving: ±15 dB @ 80 Hz
MAIN EQ: 9 EQ (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz) ±15 dB
DSP Section: A/D and D/A converters 24-bit
DSP Resolution: 24-bit
Type of effects: Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo, Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay, Thickener
Presets: 16
Controls: 16-position preset selector
Clip LED
Mute switch with peak LED Indicator
Main Mix Section Noise (Bus noise)
Fader 0 dB, Channels muted: -94 dBu
Fader 0 dB, All Input Channels Assigned and Set To Unity Gain: -92 dBu
Phantom Power: Mic Pin 2 / Pin 3 and Pin 1 47±2V
Power supply main voltage: 100 V - 230 V
Dimensions (WxLxH): 765mm x 400mm x 115mm
Weight: 23.4 lb
NEW FOR 2011 - FIRST UK STOCK NOW IN !!
THE ALTO TOURMAX SXM112A - 400W ACTIVE STAGE MONITOR
Main Features
- 12-INCH 2-WAY BI-AMPLIFIED STAGE MONITOR
- 400W Continuous - 800w Peak Watt power
- 12” coax woofer, 1” neodymium driver
- Mic/Line input with volume control, XLR output to link speakers
- Lightweight, trapezoidal cabinet with handle
- 16 modeling presets to tweak the sonic characteristic of your sound
- Multi-layer Birch cabinet with recessed handles
Constructed To Take A Beating
Built to take a beating night after night, week after week, the TOURMAX SXM112A's cabinet is made of thick Baltic Birch, features a heavy-duty steel grill that's built to last, and is covered in a ruggedized black textured finish that is scratch and dent resistant. Recessed handles makes the TOURMAX SXM112A easy and safe to move from rehearsal space to stage and back again while heavy-duty rubber feet ensure that it stays put no matter how much volume you pump through it.
Superior Sound Quality
The TOURMAX SXM112A delivers a big sound with a high-performance 12-inch LF driver (2-inch voice coil), and an exacting 1-inch HF driver. What's more, it utilizes a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The TOURMAX SXM112A is the perfect solution for club installations, rehearsal spaces, gigging musicians, mobile DJs, and houses of worships who need additional sound reinforcement.
More Than Just A Stage Monitor
We understand that the TOURMAX SXM112A is going to get used in a lot of different situations. Much of the time it'll be a wedge-type monitor on stage, but due to the pole mounting capabilities and full-range sound, it's equally capable as a side fill, drum or keyboard monitor, main speaker, and more. To help fill those various roles, we've built in a modeling effects unit that changes the sonic characteristics of the TOURMAX SXM112A with the turn of a dial. Choose from 16 presets that maximize your sonic needs with options for vocalists, guitar players, pianists, drummers and sound engineers.
Plug It In, Turn It On
The TOURMAX SXM112A houses more than just great sound under the hood, it features a built-in Class D, 400W bi-amplified system (800W Peak). As a self-powered stage monitor, all you need to do is plug in your audio and power cables, turn it on, and you're all set. No external amplifiers to set up or transport - it's all built into the TOURMAX SXM112A.
TECH INFORMATION
- Power System: Continuous-400W ( 335W LF + 65W HF), Peak-800W (670W LF + 130W HF)
- Maximum SPL @ 1m: 118dB Continuous/ 121dB Peak
- Coverage ( HxV ): 70° H x 70° V Spherical Horn
- Transducer Low: 12” Coax / 2” voice coil
- Transducer High: 1” Neodymium Driver / 1” voice coil
- Protection: Low - High Analog Limiter
- Electronic Protections: MODELLER with 16 Preset / Line Volume/ Clipping LED indicator / Ground Switch
- Input Level: Line +4dB
- Input Impedance: 30kΩ Balanced / 15kΩ Unbalanced
- Input Connector: Combo Jack with XLR/TRS
- External Control: Volume Control/ Power ON with Green LED/ Clip Limiter with Red LED/ Ground Lift
- Power Supply: AC-220/240V or AC-110/120 Volt, with Switching Power Mode.
- Cabinet: Trapezoidal Shape / Multi-layer Plywood/ Handle / Black Paint finishing
- Dimensions (HxWxD): 313mm x 393mm x 513mm
- Net Weight: 26.12 lbs. / 11.85kg
- Dimensions (WxLxH): 313mm x 393mm x 513mm
- Weight: 26.12 lb
.jpg)
