WHARFEDALE PRO Q-230 Q SERIES DUAL 30 BAND GRAPHIC EQUALISER

Email to a Friend

Be the first to review this product

Availability: In stock

RRP: £279.00 Our Price: £228.00

Quantity

WHARFEDALE PRO Q-230 Q SERIES DUAL 30 BAND GRAPHIC EQUALISER

Double click to enlarge

Additional Images

Product Description:

THE WHARFEDALE PRO - EVP-X15PM 400RMS ACTIVE STAGE MONITOR

The EVP-XP is the powered version of the EVP-X Series. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. The EVP-XP series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application.

FEATURES

Powered version for EVP-X15M

15" 2 way monitor

50-18kHz frequency response (+/-3dB)

External speaker output connector

5 Band Graphic EQ

2 x combined jack and XLR balanced input connectors

400W RMS / 600W peak amplifier power

H/D/W: 645 x 473 x 445 mm, 27.4kg

Thermal, DC fault and short circuit protection

Hi/Low EQ control in the master section

Balanced line output

Integral, preset limiter prevents clipping distortion

1/4" and XLR balanced combo input connectors

Power on and system AGC protect LED indicators

Durable black carpet finish

SPECIFICATIONS

MODEL EVP-X15PM

GENERAL INFO

SYSTEM TYPE 15" 2-way powered monitor

FREQUENCY RESPONSE +/- 3DB 50 - 18kHz

LF DRIVER

LF DRIVER SIZE MM / INCHES 1x15"

LF VOICE COIL SIZE 64.26 /2.5"

HF SECTION

HF VOICE COIL SIZE 44/1.75"

HF DIAPHRAGM MATERIAL Titanium

HORN DISPERSION (H X V) 90 x 60

HF EXIT SIZE MM / INCHES 25 /1"

HF HORN SHAPE Elliptical

CROSSOVER SECTION

CROSSOVER FREQUENCY / FILTER N/A

PHYSICAL FEATURES

FINISH Black carpet

STAND ADAPTER - BOTTOM No

STAND ADAPTER - TOP No

ENCLOSURE SHAPE Monitor

AMPLIFIER POWER

CONTINOUS RMS 400W

PEAK (WATS) 600W

PROTECTIONTYPE Dynamic/AGC

POWER ON INDICATOR Green LED

SYSTEM DYNAMIC AGC Orange LED

PHASE SWITCH N/A

INPUT SENSITIVITY

MIC 5mV

RCA 0.5V

LINE 0.775V

CONNECTORS

INPUT CONNECTORS A Jack/XLR combo sw. bal. mic/line

INPUT CONNECTORS B Jack/XLR combo / RCA line level

LINE OUTPUT TYPE XLR male balanced

SPEAKER LEVEL INPUT N/A

EXTERNAL SPEAKER OUT 1

INPUT IMPEDANCE

MIC 470 OHMS

LINE INPUT A 47K

LINE INPUT B 10 KOHMS

MAIN EQ 5 band graphic EQ

DIMENSIONS & WEIGHT

HEIGHT ( MM / INS ) 645

WIDTH FRONT / REAR / MM / INS 445

DEPTH ( MM / INS ) 473.5

NET WEIGHT ( KG / LBS ) 27.4kg

GROSS WEIGHT ( KG / LBS ) 30.5 kg

THE WHARFEDALE PRO - Q-230 GRAPHIC EQUALISER

The Q-230 is a dual channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.

A fader range switchable from 6dB to 12dB helps you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-230 is housed in a 2U 19” rackmount chassis and and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

SPECIFICATIONS

MODEL Q-230
POWER SUPPLY
OPERATING VOLTAGE 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
POWER CONSUMPTION 12W
MAINS CONNECTION IEC receptacle
INPUT/ OUTPUT
CONNECTORS 1/4" TRS, female XLR(pin 2 hot)
INPUT IMPEDANCE Balanced 20k ohm,unbalanced 10k ohm
MAX INPUT LEVEL >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
TYPE Impedance-balanced/unbalanced, RF filtered
OUTPUT IMPEDANCE Balanced 100 ohm,unbalanced 50 ohm
MAX OUTPUT LEVEL >+21dBu balanced/ unbalanced into 2k ohm or greater
SYSTEM PERFORMANCE
BANDWIDTH 20Hz to 20kHz, +0.5/-1dB
DYNAMIC RANGE 108 dB
SIGNAL-TO-NOISE 90 dB
THD + NOISE <0.004%
INTERCHANNEL CROSSTALK <-80dB, 20Hz to 20kHz
FREQUENCY RESPONSE <10Hz to >50kHz, +0.5/-3dB
FUNCTION SWITCHES
EQ BYPASS Bypasses the graphic equalizer section in the signal path
LOW CUT Sweepable with rotary control from 20Hz – 100Hz
RANGE Selects either +/- 6dB or +/-12dB slider boost/cut range
SOFT LIMIT Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
DIMENSIONS/WEIGHT
DIMENSION 482.6 x 168 x 88 mm
WEIGHT 3.93 kg