The Proel Stagegear DB1P is a Passive DI BOX with isolation transformer, PAD and filter for high frequencies.
DB1P is a single-channel passive DI BOX equipped with the same type of MU-METAL core transformer used in the DB1A, which provides minimum distortion, linear phase and hum-free transmission also on very long cables. Thanks to the input stage design, DB1P can accept also signals coming directly from the power output of instrument amplifiers, PAD up to 60 dB. A specially designed input filter is also available for cutting any hiss or buzz noise coming from acoustic or electric guitar and basses.
Features & Specifications
Type 1 channel passive DI
Width 215 mm (215 mm)
Height 50 mm (50 mm)
Depth 125 mm (125 mm)
Weight 1 kg
Rack Units 1/2 rack unit.
Removing the two molded sides and attaching two units, with the supplied
brackets, you can mount two by two DI boxes into a standard 19" rack.
Inputs Two Parallel 1/4" jack connectors and one parallel RCA connector (unbalanced).
Input Impedance 120 kOhm (pad at 0 dB)
47 kOhm (pad at -20/-60 dB)
44 kOhm (pad at -40 dB)
Input Levels +15 dBu (pad at 0 dB)
+35 dBu (pad at -20 dB)
+55 dBu (pad at -40 dB)
+75 dBu (pad at -60 dB)
Outputs XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Output Levels into 1 KOhm or greater
-5 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
Channels 1 nr. (1 nr.)
Frequency response 10 Hz to 100 kHz, +0 dB/-1 dB
Distortion (THD) < 0.007 %
S/N Ratio < -105 dBu unweighted
Controls Pad -20, Pad -40, Gnd Lift, Filter (12" emulator)
Notes Insertion loss 20 dB, CMR > 100 dB, Phase distortion 0° at 20 Hz, 0° at 20 kHz.
The Proel Stagegear DB1P is a Passive DI BOX with isolation transformer, PAD and filter for high frequencies.
DB1P is a single-channel passive DI BOX equipped with the same type of MU-METAL core transformer used in the DB1A, which provides minimum distortion, linear phase and hum-free transmission also on very long cables. Thanks to the input stage design, DB1P can accept also signals coming directly from the power output of instrument amplifiers, PAD up to 60 dB. A specially designed input filter is also available for cutting any hiss or buzz noise coming from acoustic or electric guitar and basses.
Features & Specifications
- Type 1 channel passive DI
- Width 215 mm (215 mm)
- Height 50 mm (50 mm)
- Depth 125 mm (125 mm)
- Weight 1 kg
- Rack Units 1/2 rack unit.
- Removing the two molded sides and attaching two units, with the supplied
- brackets, you can mount two by two DI boxes into a standard 19" rack.
- Inputs Two Parallel 1/4" jack connectors and one parallel RCA connector (unbalanced).
- Input Impedance 120 kOhm (pad at 0 dB)
- 47 kOhm (pad at -20/-60 dB)
- 44 kOhm (pad at -40 dB)
- Input Levels +15 dBu (pad at 0 dB)
- +35 dBu (pad at -20 dB)
- +55 dBu (pad at -40 dB)
- +75 dBu (pad at -60 dB)
- Outputs XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
- Output Levels into 1 KOhm or greater
- -5 dBu (for 0.1% THD at 50 Hz)
- +5 dBu (for 0.1% THD at 1k Hz)
- Channels 1 nr. (1 nr.)
- Frequency response 10 Hz to 100 kHz, +0 dB/-1 dB
- Distortion (THD) < 0.007 %
- S/N Ratio < -105 dBu unweighted
- Controls Pad -20, Pad -40, Gnd Lift, Filter (12" emulator)
- Notes Insertion loss 20 dB, CMR > 100 dB, Phase distortion 0° at 20 Hz, 0° at 20 kHz.
.jpg)
