NEW FOR 2011-12 - THE CITRONIC IEM16 UHF IN-EAR MONITORING SYSTEM
16-channel PLL UHF stereo in-ear monitoring system to enable a performer to hear a monitor mix directly via in-ear headphones. Eliminates the need for stage monitors and delivers faultless foldback with freedom of movement. Also, any number of beltpacks can receive from a single transmitter, allowing groups to use this system for conference, training and translation applications.
FEATURES
Backlit LCD display on transmitter & receiver
UHF 16-channel PLL synthesized
Stereo or Mono operation
Rack ear or rear mounted antenna
Professional in-ear headphones included
Additional wired headphone output (6.3mm jack)
Balanced line inputs (2 x combo)
19" rack ears included
Supplied in ABS flight case
50.0m maximum range
SPECS
Carrier frequency 863.1 - 864.9MHz (16 divisions)
Power supply: Transmitter 12-18Vdc (adapter supplied)
Settings: Transmitter Group (1), Channel, Lock, Mono/Stereo
Controls: Transmitter Power, Set, Up/down, Input level, Volume, Pad
Connections: Transmitter D.C. in, Antenna (TNC), Combo input L + R, Phones out
Dimensions: Transmitter 44 x 210 x 185mm
Weight: Transmitter 930g
Power supply: Beltpack receiver 3Vdc, 2 x AA batteries (supplied)
Controls: Beltpack receiver On/volume, Esc, Up/down, Set
Settings: Beltpack receiver Balance, Group (1), Channel, Lock, HF boost
Connections: Beltpack receiver 3.5mm stereo jack
Dimensions: Beltpack receiver 110 x 65 x 25mm
Weight: Beltpack receiver 98g (without batteries)
Flight case dimensions 310 x 435 x 100mm
NEW FOR 2012 THE CITRONIC CX23 ACTIVE CROSSOVER
CX23 ACTIVE CROSSOVER - 2 / 3-WAY
The CX23 is a 2-way stereo or 3-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the amp driving the mid/top frequency cabs. This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.
FEATURES
- 2-way stereo, 3-way mono crossover
- 19" rack mountable
- Butterworth filters - 18dB/octave
- Continuously adjustable cutoff frequencies
- 40Hz ultra-low frequency cut
- Phase invert function
- Inputs and outputs via XLR
SPECS
- Power supply 115/230Vac selectable 50/60Hz (IEC)
- Input impedance: balanced 40k ohms
- Input impedance: unbalanced 20k ohms
- Output impedance2 20 ohms
- Crossover ranges: stereo 50Hz-5kHz;750Hz-7.5kHz
- Crossover ranges: mono 50Hz-5kHz;750Hz-7.5kHz; 2kHz-20kHz
- Filter slope 18dB/octave
- Frequency response 20Hz-25kHz +0/-1dB
- Signal to noise ratio >90dB
- THD 0.006%
- Dimensions 482 x 170 x 44 mm
- Weight 2.5Kg
.jpg)
