Powerful, affordable, reliable, flexible, K3 is the new K Series amplifier.
An incredible price/performance ratio and top sound quality come together to create superior value in the market place.
A new power supply, protected up to 400 Vac.
A redesigned smart card for preset management.
A shorter chassis, only 360 mm deep.
A lighter weight, only 8 kg -17,6 lbs.
Available in touring and installation version.
A couple of K3 are capable to grant an overall better flexibility, reliability and performance compared to what is offered by any other 2U 4 channel amplifier at the same rack space requirement and price.
2x 1.400 W/8 Ohm
2x 2.600 W/4 Ohm
2x 2.800 W/2 Ohm
Dimensions: 1 RU, depth 360 mm (120 mm less than other K series models)
Weight: 8 Kg / 17,6 lbs
Power Consumption: 1500 VA
400 Vac Mains over voltage protected
XLR female Neutrik® input connectors
XLR male Neutrik® connectors for link capability
Advanced switch-mode worldwide operating power supply technology
Power Factor Correction PFC for extremely low mains current consumption and wide mains operating range
Temperature controlled continuous variable speed fan for low noise and optimized cooling
LCD matrix interactive display
Digital gain-attenuator control
User selectable maximum output power for each channel
User selectable maximum mains current draw
Comprehensive-user friendly front panel display menu
Temperature monitoring with LCD traced historical behaviour
Downloadable log file of functional fault events with time related trace
Real time load impedance measurement / display for each channel
Real time output power measurements / display for each channel
Real time mains voltage and current measurements / display
Defeateable gate selection for each channel
Hardware monitor available for fast local diagnostic
Fixed frequency switch mode output stage for high grade sound accuracy
Built in Remote Control (RS 485 interface) for full diagnostic, operational setting and system monitoring
Smart Card settings, parameters and upgrades functionality
Lockable set-up by user selectable access key code
Optional DSP board
Optional Ethernet board
Bandwidth (1W, 8 Ω): 5Hz – 20 KHz +/- 0.2dB
SNR (20Hz-20kHz A-weighted): >112 dB
Distortion THD: Max < 0.5% from 0.1W to full power (typically < 0.05%)
Intermodulation distortion DIM30: Max < 0.5% from 0.1W to full power (typically < 0.05%)
Intermodulation distortion SMPTE: Max < 0.5% from 0.1W to full power (typically < 0.05%)
Damping Factor (8 Ω ): >5000 (20Hz-200Hz)
Voltage Gain: 26dB; 29dB; 32dB; 35dB user selectable
Maximum Input Level: +25dBu absolute maximum
Slew Rate (8 Ω ): 50V/µS (input filter bypassed)
DC, VHF, THERMAL, AC, CLIP LIMITER, 400Vac MAINS OVERVOLTAGE
AC Line Voltages: 95 - 265V (50/60Hz)
Power Factor cos() More than 0.90 from 500 W to full power
Operating Environmental Temperature: 0°C / + 45° C
Powerful, affordable, reliable, flexible, K3 is the new K Series amplifier.
- An incredible price/performance ratio and top sound quality come together to create superior value in the market place.
- A new power supply, protected up to 400 Vac.
- A redesigned smart card for preset management.
- A shorter chassis, only 360 mm deep.
- A lighter weight, only 8 kg -17,6 lbs.
- Available in touring and installation version.
A couple of K3 are capable to grant an overall better flexibility, reliability and performance compared to what is offered by any other 2U 4 channel amplifier at the same rack space requirement and price.
SPECS
- 2x 1.400 W/8 Ohm
- 2x 2.600 W/4 Ohm
- 2x 2.800 W/2 Ohm
- Dimensions: 1 RU, depth 360 mm (120 mm less than other K series models)
- Weight: 8 Kg / 17,6 lbs
- Power Consumption: 1500 VA
- 400 Vac Mains over voltage protected
- XLR female Neutrik® input connectors
- XLR male Neutrik® connectors for link capability
FEATURES
- Advanced switch-mode worldwide operating power supply technology
- Power Factor Correction PFC for extremely low mains current consumption and wide mains operating range
- Temperature controlled continuous variable speed fan for low noise and optimized cooling
- LCD matrix interactive display
- Digital gain-attenuator control
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Comprehensive-user friendly front panel display menu
- Temperature monitoring with LCD traced historical behaviour
- Downloadable log file of functional fault events with time related trace
- Real time load impedance measurement / display for each channel
- Real time output power measurements / display for each channel
- Real time mains voltage and current measurements / display
- Defeateable gate selection for each channel
- Hardware monitor available for fast local diagnostic
- Fixed frequency switch mode output stage for high grade sound accuracy
- Built in Remote Control (RS 485 interface) for full diagnostic, operational setting and system monitoring
- Smart Card settings, parameters and upgrades functionality
- Lockable set-up by user selectable access key code
- Optional DSP board
- Optional Ethernet board
- Bandwidth (1W, 8 Ω): 5Hz – 20 KHz +/- 0.2dB
- SNR (20Hz-20kHz A-weighted): >112 dB
- Distortion THD: Max < 0.5% from 0.1W to full power (typically < 0.05%)
- Intermodulation distortion DIM30: Max < 0.5% from 0.1W to full power (typically < 0.05%)
- Intermodulation distortion SMPTE: Max < 0.5% from 0.1W to full power (typically < 0.05%)
- Damping Factor (8 Ω ): >5000 (20Hz-200Hz)
- Voltage Gain: 26dB; 29dB; 32dB; 35dB user selectable
- Maximum Input Level: +25dBu absolute maximum
- Slew Rate (8 Ω ): 50V/µS (input filter bypassed)
- DC, VHF, THERMAL, AC, CLIP LIMITER, 400Vac MAINS OVERVOLTAGE
- AC Line Voltages: 95 - 265V (50/60Hz)
- Power Factor cos() More than 0.90 from 500 W to full power
- Operating Environmental Temperature: 0°C / + 45° C
NEED MORE INFO ? CLICK HERE
DID YOU KNOW WE STOCK THE FULL RANGE OF POWERSOFT AMPLIFIERS !
JUST EMAIL US AT sales@theaudioworksuk.com WITH THE MODEL YOU REQUIRE
WE WILL EMAIL YOU BACK WITH THE BEST PRICES IN THE COUNTRY !
.jpg)
