YAMAHA EMX212s 440W MIXER AMPLIFIER WITH FX

Experienced musicians, performers, speakers, and club operators know the importance of a high-quality sound system with the right features and performance to deliver their sound. Where portability and convenience are important criteria, a system based on a high-performance Yamaha EMXseries powered mixer is definitely the way to go.

In one integrated, portable unit you have a mixer to combine and balance your microphone, instrument, and line sources, effects to refine and polish your sound, and power to drive the main speakers and even monitor speakers as well. But that's nowhere near the whole story .

Yamaha EMX-series Powered Mixers offer a range of features that let you mix, process, and deliver your sound with maximum quality and creative control ... and, of course, that unrivalled Yamaha sound.

Durable, Lightweight Design
The EMX powered mixers offer the ideal combination of outstanding sound performance and easy handling. They're lightweight only 10 kilograms (22lbs.) and feature conveniently located handles for maximum carrying comfort. They're also built tough to withstand the rigors of use on the road.

High Power For Main and Monitor Speakers
These powered mixers certainly don't skimp on power. The EMX212S with 220 watts per channel there's a power configuration to suit any application and venue. All models also feature a power mode switch that lets you use the two power channels as a stereo amplifier, or you can use one of the channels for the main speaker(s) and the other to drive monitors with a separate monitor mix set up via the channel MONITOR controls.

Yamaha Speaker Processing
Yamaha Club-series speakers are fine performers in their own right, but with Yamaha Speaker Processing you get extra-smooth highs and enhanced low-frequency output.

Yamaha EMX212S Features:

• 220 Watts Rms Per Channel
• Feedback Channel Locating (FCL) System
• SPX Digital Effects - 16 top-quality Yamaha SPX effects - including reverb, echo, chorus, flanger, phaser, and even distortion
• 12 Inputs
• High Power For Main and Monitor Speakers
• Built-in Graphic EQ
• Stand-by Mode
• Durable, Lightweight Design - only 10 kilograms (22lbs.)

  GENERAL SPECIFICATIONS

  	EMX212S	EMX312SC	EMX512SC
  Maximum Output Power @ 0.5 % THD at 1 kHz	220 W x 2	300 W x 2	500W x 2
  Frequency Response	-3, 0, 1 dB 20 Hz-20 kHz, ref to the nominal output level @ 1 kHz
  Total Harmonic Distortion	Less than 0.5 % (THD+N) +14 dB @ 20 Hz, 1 kHz, 20 kHz, GAIN control: all nominal
  Hum & Noise*1	Equivalent Input Noise, -115 dBu, Rs = 150 Ω CH 1-4 MIC/LINE: MIC
  Crosstalk @ 1 kHz	-65 dB
  Input Connectors	CH 1-4: XLR and Phone CH 5/6, 7/8: XLR and Phone CH 9/10, 11/12: XLR and Pin
  EQ	HIGH, MID, LOW
  Phantom Power	15 V
  Graphic Equalizer	7 Band (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz): Main (Stereo) and Monitor
  Digital Effects	SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal Processing): 16 Programs
  Power Amp. Mode	Main L/R, Main (L+R)/Monitor
  Foot Switch	Effect On/Off
  Dimensions (W x D x H)	442 x 274 x 286 mm (17-3/8" x 10-3/4" x 11-1/4")
  Weight	10 kg (22 lbs.)
  Power Requirements/Consumption	U/C: 120 V 60 Hz, 270 W	U/C: 120 V 60 Hz, 400 W	U/C: 120 V 60 Hz, 450 W