Studiomaster PH 1000TX-8R PowerHouse
Powered Rack Mixer with Duo DSP
The latest range to join the Powerhouse series raising the standard, yet again, of professional powered mixers. Twin DSP effects, 3 auxiliary sends, stereo sub group and a choice of four models, features normally found on more expensive mixers. But this is just the start. Internally modular construction means the 1000TX can be serviced and give you far longer useful life than lower cost, single board designs. 500 Watts per channel, stereo 9 band graphic equaliser and 3 band mic channel EQ (with mid sweep) help you easily create a good sound for your audience without distortion! The flexibility of the 1000TX extends even further with the stereo input channels including a mic input – so if you need more mics or more stereo inputs, you’re covered.
The range consists an 8 channel rack mounting model and 8, 12 & 16 channel desk top models all with goose neck lamp socket, 60mm travel smooth faders and effects on/off foot switch sockets.
Features
Powered Mixer with Duo DSP
1000 Watts of audio power
8 channels: 6 mic, 2 stereo+mic, rack mount only
Two on board high quality digital effects
3 auxiliary sends
Stereo sub group
Choice of four models
Applications:
Solo & Duo acts
Small bands
Installation & rental companies
Specifications:
Hi pass filter (mic channels only): 80Hz, 18dB/oct
Mic channel equalisation – 3 band ±15dB: HF: 12kHz Mid: 200-5kHz LF: 60Hz
Stereo channel equalisation – 4 band ±15dB: HI: 12kHz Hi Mid: 5kHz Lo Mid: 300Hz Lo: 50Hz
Output equalisation – 9 band ±12dB: 63, 125, 250, 500, 1kHz, 2, 4, 8, 16.
Auxiliary 1 assignment: Aux 1 (post fader) or DSP 1 (post fader)
Auxiliary 2 assignment: Aux 2 (pre fader) or DSP 2 (post fader)
Mon assignment: Post fader or Pre fader
Channel assignment: MIX (L&R) and Group L&R)
+48V phantom power: Selectable on each channel
Power output, per channel: 500W @ 4ohm, 250W @ 8ohm
Frequency response ±1dB: 20-20kHz
THD: 0.01%
Connections: Outputs: Industry standard 4 pole
Power requirements: 115V model, 230V model, 50/60Hz
Studiomaster PH 1000TX-8R PowerHouse - Powered Rack Mixer with Duo DSP
The latest range to join the Powerhouse series raising the standard, yet again, of professional powered mixers. Twin DSP effects, 3 auxiliary sends, stereo sub group and a choice of four models, features normally found on more expensive mixers. But this is just the start. Internally modular construction means the 1000TX can be serviced and give you far longer useful life than lower cost, single board designs. 500 Watts per channel, stereo 9 band graphic equaliser and 3 band mic channel EQ (with mid sweep) help you easily create a good sound for your audience without distortion! The flexibility of the 1000TX extends even further with the stereo input channels including a mic input – so if you need more mics or more stereo inputs, you’re covered.
The range consists an 8 channel rack mounting model and 8, 12 & 16 channel desk top models all with goose neck lamp socket, 60mm travel smooth faders and effects on/off foot switch sockets.
Features
- Powered Mixer with Duo DSP
- 1000 Watts of audio power
- 8 channels: 6 mic, 2 stereo+mic, rack mount only
- Two on board high quality digital effects
- 3 auxiliary sends
- Stereo sub group
- Choice of four models
Applications:
- Solo & Duo acts
- Live bands / Pa
- Installation & rental companies
Specifications:
- Hi pass filter (mic channels only): 80Hz, 18dB/oct
- Mic channel equalisation – 3 band ±15dB: HF: 12kHz Mid: 200-5kHz LF: 60Hz
- Stereo channel equalisation – 4 band ±15dB: HI: 12kHz Hi Mid: 5kHz Lo Mid: 300Hz Lo: 50Hz
- Output equalisation – 9 band ±12dB: 63, 125, 250, 500, 1kHz, 2, 4, 8, 16.
- Auxiliary 1 assignment: Aux 1 (post fader) or DSP 1 (post fader)
- Auxiliary 2 assignment: Aux 2 (pre fader) or DSP 2 (post fader)
- Mon assignment: Post fader or Pre fader
- Channel assignment: MIX (L&R) and Group L&R)
- +48V phantom power: Selectable on each channel
- Power output, per channel: 500W @ 4ohm, 250W @ 8ohm
- Frequency response ±1dB: 20-20kHz
- THD: 0.01%
- Connections: Outputs: Industry standard 4 pole
- Power requirements: 115V model, 230V model, 50/60Hz
.jpg)
