ELECTROVOICE CPS 2.6 MKII 1800W POWER AMPLIFIER

The next generation of Contractor Precision Series two-channel amplifiers provide flexibility and reliability for the professional installation business.  Designed for the contractor, the CPS 2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter (HPF).

Various optional signal processing modules include 50 Hz and 800 Hz crossovers for cinema systems as well as the XHP Variable high-pass module for ZX, Sx and EVID loudspeakers.

Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

Specifications

Analog Inputs	2, electronically balanced, Phoenix-type
Amplifier Gain (dB)	32 dB
Continuous rated power (1k Hz, THD 1%) 2§Ù	900 Watts
Continuous rated power (1k Hz, THD 1%) 4§Ù	600 Watts
Input Impedance (balanced)	20 k§Ù
Continuous rated power (1k Hz, THD 1%) 8§Ù	380 Watts
Continuous rated power (20-20k Hz, THD<0,2%) 4§Ù	500 Watts
Continuous rated power (20-20k Hz, THD<0,2%) 8§Ù	250 Watts
Maximum bridged output 4§Ù	1800 Watts
Maximum bridged output 8§Ù	1200 Watts
CAN Bus Interface	Yes (With Optional RCM-810 Card)
Frequency Response	10 Hz-40 kHz
Audio Network	No
Variable Load Drive (VLD)	No
Slew Rate	< 26 V / µs
Mains Voltage	240 V, 230 V, 120 V or 100 V; 50 Hz...60 Hz (factory configured)
Cooling	Front-to-Rear, 3-stage fans
Crossover Type	Optional Modules
Electronics Type	Amplifier
Network Control (IRIS-Net)	Optional
Total harmonic distortion	< 0.03 %
Intermodulation Distortion (SMTPE)	< 0.05 %
DIM 30	< 0.02 %
Input Sensitivity	+3.1 dBu (1.11Vrms)
Weight Net	14.8 kg ( 32.63 lbs )
Dimensions (HxWxD)	88.1 x 483 x 421.5 mm (3.47" x 19.02" x 16.59")