The RS15 is the first product to feature NEXO’s patent-pending RAY SUB Technology. Comprised of a 15 inch transducer with a frequency response of 35Hz – 200Hz in omni or 35Hz- 150Hz in directional mode and a sensitivity of 105db SPL, the RS 15 presents an unchallenged versatility for installation and touring requirements.
The RS15 sub does not face the same direction while in omni and cardioid mode. In cardioid mode, the RS15 sidewalls (where the rigging system is attached) behave as the cabinet's front and rear face
As such, RS15's cardioid LF and VLF energy propagates from only one end of the enclosure, rather than from the front face. This behavior is maintained regardless of whether speaker cones are positioned on the side or top.
| Components |
2 x 15” (38cm) long excursion neodymium 8Ω drivers |
| Height x Width x Depth |
454 x 564 x 1074mm ( 17.9” x 22.2” x 42.3” ) without accessories |
| Shape |
Rectangular |
| Weight |
Net Weight without accessories 52Kg (115 lbs) |
| Connectors |
2 x NL4MP SPEAKON 4 pole (In & Through) |
| Construction |
Baltic birch ply finish with structured black coating.
Dark grey carpet finish also available. |
| RS15 WITH NX242-ES4 TD CONTROLLER OR NXAMP SYSTEM SPECIFICATION |
| Omni Mode |
|
| Frequency Response @ -3db [a] |
35Hz - 100Hz |
| Usable Range @ -6db [a] |
35Hz - 250Hz |
| Sensitivity 1W @ 1m [b] |
105dB SPL Nominal |
| Peak SPL @ 1m [b] |
136 – 139dB Peak (2x700W to 2 x 1200W/8Ω) |
| Dispersion |
Omni & Directional pattern over the entire useable bandwidth depending on the NX242 or NXAMP TDcontrollers setup. (two channels of the NX242ES4 or NXAMP are required to process directional setups) |
| Directivity Index [c] |
1.5 |
| Crossover Frequency: NX242 or NXAMP TDcontrollers preset dependent |
From 80Hz to 200Hz |
| Nominal Impedance |
2 x 8Ω |
| Recommended Amplifiers |
1 amplifier channel is required for omni mode operation, rated at 1400 to 2400 Watts into 4Ω |
PLEASE CLICK BELOW FOR FULL DATASHEET
http://www.theaudioworksuk.com/RS15-DATA-Sheet.pdf
.jpg)
