ACME LED CF-805 COLOR BAR

Acme's new CF-805 Visio Bar creates chase scenes your eyes will be fixed to all night. This ultra-bright indoor batten is a long, slim line colour bar with 384 red, green and blue LED's that produce

eye-catching patterns.

The robust metal housing is nearly one metre in length and houses 128 red, 128 green and 128 blue 5mm LED's, which are arranged in 24 colour banks of 16 LED's each, and are great for adding drama, colour and movement to any nightclub, DJ or band performance. Internal control features include strobe, chase and colour-mixing effects that run at speeds from fast to slow, as well as 0-100% electronic dimming.

Using a DMX controller you can go a step further and mix custom colours via RGB colour mixing. The Visio Bar can be operated in a variety of DMX channel modes: 3, 4, 7, 10, 16, 24 or 28 channels for different degrees of control. The 28-channel mode allows control over each bank of red, green and blue LED's independently, and create stunning chases and colour mixes.

Connecting the CA-8 controller gives you control over strobe speed, chase speed, colour mix speed, and blackout. Alternatively the unit can be run without an external controller in Sound Active mode triggering the internal chase programmes.

Another first for this type of fixture is the ability to connect Par Cans from the Acme Visio range and have all units working together in master/slave modes to either the internal chase patterns or sound activation producing stunning wall washing effects via the battens whilst the dance floor comes alive to the traditional "Rock n Roll" look of the Par cans all changing in perfect sync.

Features:

Ultra Bright LED colour bar

LEDs: 384 (128 Red, 128 Green, & 128 Blue )

24 x 16 LED colour banks (16 LED's per colour bank)

DMX Channels: 4, 6, 9, 15, 27 or 24 channel modes

Colour strobe effect (fast to slow)

Colour mix effect (fast to slow)

LED chase speeds (fast to slow)

Electronic Dimming 0 - 100%: Control of Red, Green & Blue LEDs

3 control modes: DMX-512; Master/slave sound active and CA-8

Linkable via 3-pin XLR cable

4-button LED display on rear panel

IEC output on rear panel to daisy chain power

Supplied with brackets (as shown)

Specifications:

Power consumption: 55W

Voltage: 100V - 240V 50Hz/60Hz

Dimensions without bracket 960 x 64 x 122.5mm

Weight: 2.5 kgs.