Q66II - the versatile workhorse of the new Q series amplifiers‚ delivers 2 x 600W @4Ohms / 2 x 900W @2Ohms and‚ provides‚ flexible drive capability for a huge variety of speaker systems, including Sx300, ZX4, SB122 etc.
Switchable LPN(Low-Pass Notch) filter circuitry provides extra tonal fundament and kick, with protective Low-Cut for using smaller passive 12" or 15" cabinets without additional subwoofers.
Specifications
| Amplifier Gain (dB) |
32 |
| Continuous rated power (1k Hz, THD 1%) 2ohm |
900 Watts |
| Continuous rated power (1k Hz, THD 1%) 4ohm |
600 Watts |
| Input Impedance (balanced) |
20 kΩ |
| Continuous rated power (1k Hz, THD 1%) 8ohm |
380 Watts |
Continuous rated power
(20-20k Hz, THD<0,2%) 4ohm |
500 Watts |
Continuous rated power
(20-20k Hz, THD<0,2%) 8ohm |
250 Watts |
| Maximum bridged output 4ohm |
1700 Watts |
| Maximum bridged output 8ohm |
1200 Watts |
| Slew Rate |
> 26 V / µs |
| Electronics Type |
Amplifier |
| Network Control (IRIS-Net) |
No |
| Total harmonic distortion |
< 0.03 % |
| Intermodulation Distortion (SMTPE) |
< 0.1 % |
| Signal-to-noise ratio (A–weighted) |
> 107 dB |
| Input Sensitivity |
+3.1 dBu |
| Weight Net |
14.8 kg ( 32.63 lbs ) |
| Dimensions (HxWxD) |
88.1 x 483 x 421.5 mm
(3.47" x 19.02" x 16.59") |
FREE UK MAINLAND SHIPPING AND GET 2 X 6M SPEAKON CABLES FREE WITH EVERY PURCHASE !
.jpg)
