http://www.theaudioworksuk.com/skin/frontend/default/default/
http://www.theaudioworksuk.com/skin/frontend/default/default/

http://www.theaudioworksuk.com/skin/frontend/default/default/

DYNACORD XA-2 TOURING PA SYSTEM

Be the first to review this product

Availability: Out of stock

RRP: £15,359.00 Our Price: £9,999.00

DYNACORD XA-2 TOURING PA SYSTEM

Double click to enlarge

Zoom Out
Zoom In

Additional Images

Product Description:

With the new Xa-2 systems, once again DYNACORD is setting the highest standards in audio performance, reliability and price. Ideal for: 

• Top-40 Indoor/Outdoor Live Events 
• High Power mobile DJ events 
• High Quality corporate events 
• High-Power speech reinforcement 
• Multimedia events 
• Theatre applications 
• Rental companies 
• Fixed installations 

Dynacord Xa 2 Complete Xa2 System includes:

2 x Xa 4000 POWER AMPLIFIERS

2 x FX 12   MID HIGH CABS

4 x FX 20   BASS HORNS

2 x PSS 415 PSS 404, PSS 401 D113018

High-quality neodymium components combined with new Constant Q horns and patented planar waveguide bass horns deliver maximum sound pressure and superlative audio performance. 
---------------------------------------- 
The FX 12 
 
The DYNACORD FX 12 is concepted as a medium longthrow mid/high- frequency cabinet in coaxial design. It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances.

The recommended active x-over frequency is 140 Hz, 18 dB/oct. Butterworth. In the lo-mid range an ND 12 A Electro-Voice loudspeaker chassis works into a conical horn. The 80x40 Constant Directivity horn, driven by an Electro-Voice 1.4" ND 6 neodymium driver delivers the frequency range above 1kHz.

The FX 12 is equipped with a passive x-over (1kHz, 18 dB/oct). Every transducer is protected against thermal overload with an electronic circuit called VOICE COIL TRACKING PROTECTION.

This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers’ voice coils. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level.

Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits ‘soft’ switching characteristics, so no annoying clicks or pops are audible.

The circuitry automatically resets after the voice coil temperature has reached a safe value.

Specifications

Cabinet Mid-Hi Cabinet Configuration Coaxial Conical Horn Operation Mode Passive

Nominal Impedance 8 Ohms Rated Power RMS 350 W Program Power 700 W SPL 2,83V / 1m 1W/8 Ohms 106 dB Max SPL 1m (calculated) 134 dB Frequency Response (-10 dB) measured with Xa4000 120 Hz -19 kHz Coverage Angle 1 kHz (-6dB) H 80° V 40° Recommended Active Crossover Frequency to Subwoofer 140 Hz / 18 dB/Oct. Butterworth Passive Crossover Frequency 1000 Hz Voice Coil Tracking Protection Separate circuits for LO-MID and HIGH Components HIGH: ND6-8 / CDH 8040-14 / MID: ND 12A Connector Wiring 4-pole, NORMAL 1+/1-, SYSTEM 2+/2- Connector Model Speakon 2 x NL4MPR Dimensions 600 x 610 x 814 mm Net Weight 48 kg Enclosure Material Poplar plywood 15 mm Finish Heavy-duty black carpet Grille Acoustic foam, powder coated steel Handles 2 Rigging tracks 4 Webbing strap points 2 Castors 4 Warranty 36 months 
--------------------------------------------- 

DYNACORD FX 20

The FX20 is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18" transducer. Frequency response is 30Hz - 150Hz (-10dB), so the crossover frequency to Mid-Hi cabinets can be chosen strictly application-oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION.

This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations.

The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX 20 cabinet is made of 15mm poplar plywood. All corner joints and braces are grooved and glued.

The cabinet surface is covered with a heavy-duty black carpet. A powder- coated steel grille and an acoustic foam front protects the speakers. The connector panel uses two 4-pole Speakon connectors (IN/OUT) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the respective two Speakon connectors.

When using DYNACORD power amp racks or system amplifiers, the whole system can be wired with 4-pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy-duty castors on the rear side guarantee easy and safe transport. Specifications

Cabinet Subwoofer Configuration Planar waveguide basshorn Nominal Impedance 8 Ohms Rated Power RMS 600 W Program Power 1200 W SPL 2,83V / 1m 1W/8 Ohms 101 dB Max SPL 1m (calculated) 132 dB Frequency Response (-10 dB) measured with Xa4000 30 Hz -150 Hz Recommended Active Crossover Frequency to Subwoofer 140 Hz / 18 dB/Oct. Butterworth Voice Coil Tracking Protection Yes Components EVX 180 B Connector Wiring 4-pole 1+/1- Connector Model Speakon 2 x NL4MPR Dimensions 610 x 905 x 814 mm Net Weight 47,5 kg Enclosure Material Poplar plywood 15 mm Finish Heavy-duty black carpet Grille Acoustic foam, powder coated steel Handles 6 Castors 4 Warranty 36 months 
----------------------------------------- 

The universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply. Xa 4000 power amps combine outstanding audio performance, highest reliability and operational safety allowing easy setup and operation of active 2-way systems with a crossover frequency of 140Hz between bass and mid/high cabinets.

The power ampfs output capacity of 1100W/4ohms for the bass channel and 900W/4ohms for the mid/high channel allows the connection of up to four 8ohms cabinets per channel. The integrated frequency crossover separates the bass from the mid/high range at 140Hz.

The x-over is carried out as a modified Butterworth-crossover with a slope of 18dB/octave. The crossover frequency of 140Hz allows the connection of basically any mid/high and bass cabinet. Using 2-or 3-way fullrange speaker systems . for example DYNACORD F150 . as mid/high cabinets is possible as well. Individual dB-scaled level controls for SUB and TOP channels, which are carried out as recess-mounted detent potentiometers provide a control range between +6dB and .‡ allow combining bass and mid/high cabinets with quite different efficiency.

The frequency response of the Xa 4000 particularly accounts for the requirements of .Liveg applications. An integrated Lo-Cut filter attenuates low-frequency signals such as rumble and subsonic noise protecting the bass cabinets from being damaged by mechanical overload.

Specifications Load Impedance / SUB 2 Ohms, 4 Ohms, 8 Ohms Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel 2 Ohms - 1800 W, 4 Ohms - 1100 W, 8 Ohms - 600 W Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel 4 Ohms - 1000 W, 8 Ohms - 500 W Load Impedance / TOP 2 Ohms, 4 Ohms, 8 Ohms Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel 2 Ohms - 1600 W, 4 Ohms - 900 W, 8 Ohms - 500 W Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel 4 Ohms - 800 W, 8 Ohms - 400 W Maximum RMS Voltage Swing, THD = 1%, 80Hz SUB, 1kHz TOP 78 V Power Bandwith, TD = 1%, ref. 1kHz, half power @ 4 Ohms 10 Hz … 50 kHz Voltage Gain ref.1kHz 37.3 dB Input Sensitivity, at rated output power, 1kHz 0 dBu (0.775 V rms) THD, at rated output power, MBW = 80kHz, 1kHz < 0.05% Maximum Input Level +22 dBu (9.76 V rms) Input Impedance, active balanced 20 kOhms Damping Factor, 1kHz > 300 Slew Rate 30 V/μs Signal to Noise Ratio Amplifier, A-weighted 102 dB Output Stage Topology Class H Power Requirements 240, 230, 220, 120V or 100V 50 Hz ... 60 Hz (factory configured) Power Consumption, at 1/8 max. output power @ 4 Ohms 850 W Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay Cooling Front-to-rear, 3-stage-fans Ambient Temperature Limits +5°C … +40°C ( 40°F … 105°F) Safety Class I Dimensions (W x H x D), mm 483 x 88.1 x 384 Weight 8.25 kg (18.2 lbs) Optional Rear-rackmount 15,5” 112930 (RMS15-CL), Rear-rackmount 18” 112933 (RMS18-CL)

WE ONLY HAVE 2 OF THESE AMAZING SYSTEMS AT THIS CRAZY LIMITED OFFER PRICE

YOU WON'T FIND THIS SYSTEM ANYWHERE CHEAPER ! SAVE A MASSIVE £6600

Additional Information

Manufacturer DYNACORD
Manufacturer Code XA-2
Availabilty Time SORRY NOW DISCONTINUED

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.