QSC K LITE KSUB K10 4000W ACTIVE PA PACKAGE

Lightweight portable powered speakers with legendary QSC amplifier power and reliability

1000 watt Class D power modules in all models (2x500 W)

Extensive DSP enhances system performance

Attractive and professional appearance

Rugged ABS enclosures (K8, K10 and K12)

Tour-grade 18 gauge steel grilles

Ergonomic handles with comfortable, non-slip grip

35 mm pole sockets with Tilt-Direct (fullrange models)

M10 rigging points for suspended installation (fullrange models)

Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.

Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.

On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP? for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.

Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.

Low freq: 10" cone transducer

High freq: 1.75" diaphragm compression driver

Frequency Response (-6 dB): 60 Hz - 18 kHz

Frequency Range (-10 dB): 56 Hz - 20 kHz

Nominal Coverage (-6 dB): 90° conical

Maximum SPL (1 meter): 129 dB peak

Amplifiers

Power output: 1000W class D (500W low, 500W high)

Input Impedance (ohms): XLR / ¼": 40k balanced / 20k unbalanced, XLR / ¼" MIC mode: 2260 balanced, RCA: 10k

Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)

Indicators: Power, Signal A, Signal B, Standby, Limit, Mic

Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector

Cooling: On demand, 50 mm variable speed fan

Size (hwd) 519mm x 320mm x 300mm

Weight 14.5 Kg

Configuration: 4th Order Bandpass

Low-frequency: 2 x 12" cone transducers

Frequency Response (-6 dB): 48 Hz - 134 Hz

Frequency Range (-10 dB): 44 Hz - 148 Hz

Maximum SPL (1 meter): 130 dB peak

Amplifiers

Power Output: 1000 W Class D (2x500 W)

Input Impedance (ohms): XLR / ¼": 40k balanced / 20k unbalanced

Controls: Power, Gain, LF Mode (Normal/DEEP?), Polarity (Normal/Reverse), Front LED (On/Off/Limit)

Indicators: Power, Signal, Standby, Limit

Connectors: Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector

Cooling: On demand, 50 mm variable speed fan

Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail

Size (hwd) 665mm x 356mm x 714mm

Weight 33.6 Kg