In addition to acoustic performance the EON515 features three full size deep-well handles, light weight, and balanced ergonomics. The new generation of EON products offers true portability and ease of handling. Five standard M10 rigging points and integrated pole mount socket increase the system’s utility. The extremely rugged copolymer enclosure has been designed for main and 45° monitor orientation in the left and right hand configuration. A full screen-backed steel grille offers additional protection for both the woofer and compression driver components.
Features
450 watt High-Performance Powered Speaker System
True portability weighing only 14.8 kg (32.5 lb)
Multiple handles with comfort rubber grips for easy transport
15" Differential Drive® low-frequency driver with neodymium magnet for low-distortion and light weight
1" throat diameter next generation JBL neodymium compression driver
Efficient Crown® Class-D amplifier technology
Built-in 3 Channel Mixer
100° H x 60° V asymmetrical wave guide for uniform audience coverage
Line level and direct microphone input capability
Selectable Pre-engineered EQ settings
Unique Mix/Loop signal flow function for extended system application
Easy “daisy-chain” connections for extending the system
Integrated M10 suspension points for easy rigging
Multi angle enclosure for main or monitor applications
Integrated 36 mm pole mount socket with stabilizing securing screw
Highly designed composite enclosures for durability, lightweight, and acoustic performance
Applications
Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues – especially when ease of use and portability are important factors.
Amplification, mixing, and monitoring for electronic musical instruments.
Everywhere you need to be heard.
Specifications
System Power Rating: 450 W continuous; 900 W peak
Frequency Range (-10 dB): 39 Hz -20 kHz; (EQ in ‘Flat’ position)
Dimensions (H x W x D): 685 x 438 x 366 mm (27.0 in x 17.3 in x 14.4 in)
Frequency Response (±3 dB): 42 Hz - 18 kHz (EQ in ‘Flat’ position)
Coverage Pattern: 100° H x 60° V nominal
Maximum SPL: 129 dB
Net Weight: 14.8 kg (32.5 lb)
INTRODUCING THE NEW JBL EON-210P 5 XT PORTABLE ACTIVE PA SYSTEM
The EON210P consists of two 10-inch, two way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.
Features
- 300 watt High-Performance Powered Speaker System
- Ergonomic soft touch top grip for easy handling
- 10” low-frequency driver with neodymium magnet for low-distortion and light weight
- 1” throat diameter next generation JBL neodymium compression driver
- Efficient Crown® Class-D amplifier technology
- 100° H x 60° V asymmetrical wave guide for uniform audience coverage
- 8 chanel powered mixer with intuitive interface
- On board digital multi-effects
- Integrated 36 mm pole mount socket with stabilizing securing screw
- Highly designed composite enclosures for durability, lightweight, and acoustic performance
Applications :
- Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues – especially when ease of use and portability are important factors.
- Amplification, mixing, and monitoring for electronic musical instruments.
- Everywhere you need to be heard
Specifications
- System Power Rating : 300 Watts (2 X 150 Stereo)
- Maximum SPL Output : 124 dB peak system
- output (pink noise)
- Net Weight of System : 33 lbs. (19 lbs. for unit
- with powered mixer,
- 14 lbs. for unit with
- storage pod)
- System Type : Powered mixer with 2 two-way bass-reflex enclosures
- Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (±3 dB) : 75 Hz - 19 kHz
- AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
- Amplifier Design : Crown® Class D
- Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
- Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
- Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
- Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced
- Ch 1-4 Combo: TRS 20 K Ohms Balanced
- Ch 5-6: TRS 25 K Ohms Balanced
- Ch 5-6: RCA 12 K Ohms Unbalanced
- Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
- Phantom Power : 30 V
- Output Connectors : Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
- Headphone output: one 3.5 mm stereo jack
- Signal Indicators
- Main Output LED Ladder : Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present
- Signal Indicators: Ch 1-4 : Peak LED: Green = signal present, Red = input overload
- EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
- System Limiter : On Board DSP Limiting and Tuning
- LF Driver : 1 x JBL 328 H 250 mm (10 in) woofer
- HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium
- compression driver
- Coverage Pattern : 100º x 60º nominal
- Crossover Frequency : 2 kHz
- Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
- Enclosure : Polypropylene
- Suspension/ Mounting : 36 mm pole socket with stabilizing screw
- Handles : One on top
- Grille : Powder coated perforated steel
- Shipping Package (HxWxD) : 21.5” x 26” x 13.75” - (546 mm x 660 mm x 349 mm)
.jpg)
