B-52 MATRIX-1000V2 700W ACTIVE PA SYSTEM

Email to a Friend

Be the first to review this product

Availability: In stock

RRP: £999.00 Our Price: £799.00

Double click to enlarge

Additional Images

Product Description:

Mix, amplify, and play back, all in one box.

Remember when playing a simple show and setting up the PA meant moving racks and racks of gear, lugging hundreds of pounds of speakers, and running miles of cables? Those days are over, thanks to the Alesis TransActive MX. This all-in-one, four-channel PA speaker gives you everything you need to play the show, play transition music from your iPod or iPhone, and load in and out in comfort.

ALL IN ONE

The TransActive MX is a complete, active PA system in a single, portable cabinet you can carry with its built-in handles or roll using the recessed wheels and pull-out handle. The system has a four-channel mixer built in with XLR and 1/4-inch inputs for microphones, all kinds of instruments, guitars, and more. Plus, the TransActive MX has a dock for all docking models of iPod and iPhone, playing music, and charging. This self-powered speaker has a built-in amplifier and a two-way loudspeaker for full-range sound. And it runs for hours and hours on its internal, rechargeable battery.

INPUTS

The TransActive MX's input section enables you to connect four channels of microphones, instruments, guitars, and other sound sources. It has XLR, 1/4-inch, and RCA inputs for a variety of gear.

AMPLIFIER AND SPEAKER SYSTEM

The TransActive MX uses a built-in amplifier for low distortion and high efficiency. The large driver gives you great low end and powerful, crisp highs.

BATTERY OR WALL POWERED

The TransActive MX has a built-in rechargeable battery for hours of cordless amplification. You can also plug in for unlimited performance time.

Rock the club with the TransActive MX. You'll spend less time and energy carrying and setting up, and more time enjoying the gig.

Features

Powerful, portable, self-contained PA system for up to 150 feet of sound projection

Four-channel mixer with Inputs for microphones, instruments, and more

Dock enables music playback from all docking models of iPod and iPhone

Rugged construction, built-in wheels, and a retractable handle for easy transport

12-hour rechargeable battery or plug-in power

Mounts on a standard 35mm speaker stand

NEW FOR 2011 - THE MATRIX-V1000 V2 700W ACTIVE PA SYSTEM

Mix, amplify, and play back, all in one box.

R700-watt Active Speaker System - 15" Subwoofer and 2x10" Satellites

The MATRIX-1000 V2 is a complete sound reinforcement solution comprising of two 10” two-way satellites, a dedicated 15” subwoofer and a built-in three-channel 700-watt power amplifier.

The three-channel amplifier features three distinct volume controls, electronic crossover with equalization and a VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound.

There is no need to finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you’re ready to go!

Suggested Applications

Mobile DJ
Karaoke
Nightclub, Restaurant, Bar Installation
Corporate Audio / Video n Home Entertainment System
Live Sound System
Stage Monitoring System
Booth Monitoring System n Drum Monitoring

V2 Upgrades: The Best Gets Better

A new high-performance compression driver for a smoother frequency response and lower distortion throughout the upper midrange frequencies.

A new elliptical wave guide with more uniform dispersion.

The addition of a voltage controlled amplifier (VCA) on all three amplifier channels to minimize the effects of amplifier clipping. This lowers the maximum distortion produced at VERY high drive levels and offers additional protection for the speaker components.

More durable dust cover.Improved B-52 handles Stack, Rock and Roll

To transport the MATRIX-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer’s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you’re ready to move the MATRIX-1000 V2 with ease.

10” Two-Way SatellitesPole Mountable, Flyable Or Angled For Use As Stage Monitors

The MATRIX-1000 V2 satellites are loaded with a custom designed 10” speaker and 1” titanium diaphragm compression driver. The “horn” is a 900 by 600 elliptical waveguide that can be rotated 900 to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also

include 3/8” – 16tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000 V2 in and out of a venue in record time.

Built-in 700-watt three-channel amplifier

The 15” subwoofer enclosure has two separate compartments. The front chamber serves as the cabinet for the custom B-52 15” subwoofer. The rear chamber houses all of the MATRIX-1000 V2’s electronic circuitry. This includes a 400-watt amplifier for the subwoofer, 2 x 150-watt amplifiers for the satellites, electronic crossover, VCA compressor, electronic equalization, pre-amp and power supply.

Amplifier Specifications