The MIXPACK Pro is the most powerful in the MIXPACK line of portable powered PA systems. A 15" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 1000 watts of continuous pure Class AB power so you`re never left wanting more. The satellites lock securely on the back side of MIXPACK Pro and the included handle and wheels make moving the whole rig no problem. Put simply, there has never been a more easy and powerful way to bring this much power to any location.
MIXPACK Pro doesn`t stop with professional amplification and speakers. A 10-channel mixer is included so you can connect everything from musical instruments to microphones to an iPod. Four simple screws can be removed allowing the mixer portion to be detached and conveniently placed into your audio rack so you don`t have to bend over to make adjustments during a show. Maybe your band is gigging or you are a live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power, Regardless of where the performance takes you, MIXPACK Pro is easy to set up with all the right connections. Stands are included and tuck neatly within the cabinet for transport so you can get the sound where it needs to go without any hassle.
Once all your gear is connected to MIXPACK Pro, you can go to work on fine tuning for the venue with MIXPACK Pro`s built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance.
When you need to get in and out in a hurry with high-power, clarity and flexibility, MIXPACK Pro is the ultimate portable PA choice. Also available are the 600W MIXPACK and 350W MIXPACK Express.
Features include
Complete Portable PA system with FX and EQ
15” subwoofer and two 2x6.5” speakers with 1000W power
10-channel mixer
24-bit Alesis DSP with 256 total effects
7-band EQ built-in
Included speaker stands store conveniently within for transport
Specifications
3-Way Powered System Bi-Amp plus passive crossover into Satellite
Low Output Power 230W RMS Class AB
MID-HIGH-Output Power 120W+120W RMS Class AB
Peak Power Ratling 1000W Peak Maximum SPL @ 1m 119.5dB Continuous - 122.5dB Peak (calculated)
Frequency Response 45Hz-20KHz @ -10dB
Impedance Low-Mid/High Low 4ohm - Mid/high 8ohm
Crossover Frequencies Active 125Hz at 12dB/Oct - Passive 3000Hz at 12dB/Oct with Electronic Dynamic Protections
Amplifier Protections Low-Mid/High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB/Oct - Limiter/Compressor
Low Frequency Device 15"/385mm - 2.5" Voice Coil
Mid Frequency Device 4×6.5"/165mm - 1.5" Voice Coil
High Frequency Device 2×1"Compression Driver - 1" Voice Coil
Hom Coverage H° × V° 80°H × 80°V
Plastic Reinforced Cabinet Polypropylene
MIXER Section
Microphone Input Electronically balanced discrete input configuration
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Gain 35dB
SNR(Signal to Noise Ratio) ＞94dB
Line input Electronically balanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHzGain 15dB
Stereo input / Output
Line input Unbalanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Impedances
Microphone Input 1.4k ohm
Channel insert retum 2.5k ohm
All other lnputs 10k ohm or greater
Tape out 1k ohm
All other outputs 120 ohm
Equalization
Hi shelving ±15dB@12KHz
Mid bell ±15dB@2.5KHz
Low shelving ±15dB@80Hz
Alesis DSP Section
A/D and D/A converters 24bit
DSP resolution 24bit
Type of effects
Hall, Room, Vocal & Plate Reverbs Mono & Stereo Delay (max
Delay Time 650ms) Chorus Flanger & Reverb Modulations Reverbs Stereo
Delay Chorus Rev+Delay and Rev+Chorus combinations
Presets 256Controls: 16-position preset selector 16-position Variation selector
Controls & Monitoring
16-position preset selector Cllp LedMute Switch with LED indicator
Main Mix Section Noise
(Bus noise) Fader 0 dB channels muted -85dB (ref:+4dBu)
Fader 0 dB all input channels assigned and set to
Unity gain:-81dBr(ref:+4dBu)
Max output 27dBu balanced
Controls 22dBu balanced 1/4" jacks
AUX Sends max out 22dBu
Power Supply AC-220/240V or AC-100/120 Volt, with Switching Power Mode.
Dimensions (WxLxH): 1060mm x 700mm x 700mm
Weight: 111.8 lb
NEW FOR 2011 - DUE IN THIS MONTH PRE ORDER FROM FIRST UK STOCKS
The 350W MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600W MIXPACK and 1000W MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn`t an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will.
MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you`re all set. MIXPACK Express also includes two mic cables and two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, moulded handle on top.
The built-in mixer on MIXPACK Express has 7 input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, REV ＋ DELAY and REV ＋ CHORUS combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.
If you need a sold PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.
Specifications
Mixer Section
- Microphone/Line Input Electronically balanced, discrete input configuration
- Frequency Response 10Hz to 55kHz, ＋/－3dBu
- Microphone Input Impedance: 3.9kΩ
- Line Input Impedance 10kΩ
- Microphone Input S/N ratio ＞94dBu
- Microphone Inputs Balanced XLR connectors
- Line Inputs Balanced / Unbalanced, 1/4` (6.3mm) TRS jack connectors
- Tape Inputs Unbalanced RCA jack
- Inputs Distortion (THD & N) 0.04% at 0dBu, 1KHz
- Channel EQ High shelving + / -15dB @12KHz Low shelving + / -15dB @80Hz
- Aux Send 1 with paths for DSP internal section, external DSP section and Monitor Out
- DSP Section 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV ＋ DELAY and REV ＋ CHORUS combinations
- Master Section Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
- Output Master EQ 7-band, ＋/－15dB@ 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
- Monitor Section Master Level knob, 4 LEDs level meter, and 1/4" (6.3mm.) MONITOR OUT jack
Speaker Section
- System Type 2-way Coax Vented box
- Frequency Response 65Hz-20kHz at －10dB
- Spherical horn Coverage 70° H × 70° V
- Continuous Power 150Watt AES Standard
- Peak Power 300Watt Peak
- Protection Electronic circuit on driver
- Speaker Specification 10" (254mm) Low Frequency Driver / 2" (50.8mm) Voice Coil, 1" (25.4mm) Neodymium High
- Input Connectors 1/4" (6.3mm.) mono (TS) jack on each cabinet
Amplifier Section
- Output Power 350W (EIAJ)
- Impedance 4Ω
- Protections Overload/Short Circuit/ Soft Clip Limiter/ Thermal Protection Fan Cooling
Standard Package
- ‧2 speaker cables
- ‧1 power cord
- ‧2 microphone cables
- ‧Stands: F-8 or F-3 are not included
.jpg)
